Greengear LPG Generator Won’t Start: Troubleshooting & Spares (2026)
In 30 seconds:
Most Greengear no-starts come down to five things: switch position, low oil, an empty propane cylinder, a dirty air f...
Greengear LPG Generator Servicing & Maintenance Schedule (2026)
The full Greengear LPG generator service schedule from the official manual: daily checks, the 20-hour first oil change, 50-hour filter cleans, spark plug care, warranty and UK spares.
How to Set Up and Run a Greengear LPG Generator Safely (2026)
Greengear LPG generators ship dry — no oil — with a transport bolt fitted. Follow this 7-step setup guide: oil fill, propane connection, leak test, safe start and shutdown.
LPG Bain Marie Won’t Heat or Pilot Goes Out? Fixes & Spares
In 30 seconds:
Most "broken" LPG bain maries are one of three things: air in the pipe, a released tap that needed a 15–20 second ho...
LPG Bain Marie Maintenance and Burner Care: Weekly Checks
In 30 seconds:
An LPG bain marie has one burner, one injector and one thermocouple — a 15-minute weekly check keeps all three hones...
How to Clean an LPG Bain Marie (Wet and Dry)
In 30 seconds:
Never wash an LPG bain marie with running water or a jet — damp wrecks the propane controls. Soft cloth and neutral ...
How to Set Up and Run an LPG Bain Marie at Temperature
In 30 seconds:
An LPG bain marie is a wet unit — fill the tank with water before you light it, every time.
Run it on propane at 37 ...
LPG Griddle Uneven Heat or Won’t Light: Fixes & Spares
Fix an LPG griddle that won't light or heats unevenly: safe first checks, thermocouple and injector faults, and the Lincat GS4/P and GS7/P spares worth carrying on the van.
LPG Griddle Maintenance: Burners, Plates & Weekly Checks
Daily habits, a 15-minute weekly safety check, burner and thermocouple care, spares codes and warranty rules for Lincat GS LPG griddles.
How to Clean and Season a Commercial LPG Griddle (Steel Plate Guide)
Ten minutes a day keeps a steel LPG griddle plate clean, seasoned and rust-free. The Lincat-approved routine: scrape, wash, dry, oil — plus carbon removal and the mistakes to avoid.