Fracino Retro Lever Coffee Machines: 1, 2 and 3-Group, LPG or Electric
Last updated: October 2026
In 30 seconds:
- The Fracino Retro is a lever espresso machine. You pull a spring-loaded lever by hand for every shot, and customers watch you do it.
- There are six models: 1, 2 or 3 groups, each as a dual fuel LPG version or an electric-only version. Prices run from £2,000 to £3,799.
- The dual fuel models heat on propane or on electric, so they suit coffee vans, trailers and horseboxes. The electric models suit cafés and fixed counters.
- Output is up to 100, 200 or 300 espressos an hour, depending on the number of groups.
- Every Retro stands 830mm tall. Check the height under your shelves or van roof before you order.
Most espresso machines hide the work behind a button. The Retro puts it in your hand, and that is the whole reason people buy one.
The Fracino Retro is the UK-built lever espresso machine for coffee businesses that want the shot to be part of the show. It is widely seen as the lever option in the Fracino range, sitting alongside the push-button Contempo. This guide covers all six models, who each one suits, and what you need in place before it arrives.
The six Fracino Retro models at a glance
| Model | Groups | Fuel | Espressos an hour | Boiler | Element (on electric) | Price |
|---|---|---|---|---|---|---|
| FCL1LPG | 1 | Dual fuel: propane or electric | Up to 100 | 7L | 2.7kW | From £2,289 |
| FCL2LPG | 2 | Dual fuel: propane or electric | Up to 200 | 14L | 2.85kW | From £3,199 |
| FCL3LPG | 3 | Dual fuel: propane or electric | Up to 300 | 20L | See note | From £3,799 |
| FCL1 | 1 | Electric only | Up to 100 | 7L | 2.7kW | From £2,000 |
| FCL2 | 2 | Electric only | Up to 200 | 14L | 4kW | From £2,900 |
| FCL3 | 3 | Electric only | Up to 300 | 20L | 7.5kW | From £3,520 |
Note on the FCL3LPG element. Our FCL3LPG listing gives a different element rating from the electric FCL3 and from Fracino’s standard 3-group rating. Until that is confirmed, we have left the figure out. Ask us before you plan your electric hook-up for this model.
Note on LPG heat input. Our dual fuel listings and the Fracino manual give different LPG heat input figures. We have left them out rather than print the wrong one. Ask us for the confirmed figure for your model.
What every Retro shares
Quick specs
- Lever group: dual spring, high-pressure lever group delivering 9 bar (as given on our dual fuel listings)
- Boiler: copper, with an automatic water level system (probe, control unit and solenoid valve)
- Height: 830mm on all six models
- Width: 375mm (1 group), 580mm (2 group), 785mm (3 group)
- Depth: 500mm
- Weight: 35kg (1 group), 55kg (2 group), 75kg (3 group)
- Group clearance: 130mm, as given on our electric Retro listings
- Warranty: 1 year parts
The case, cup tray and drip tray are stainless steel. Hot water and steam come out when you turn the valve handles.
How a lever shot works
A pump machine pushes water through the coffee for you. On the Retro, the spring in the group does that job, and you load the spring by pulling the lever.
Making a shot, step by step (from the Fracino manual)
- Lock a warm filter holder with coffee into the group and put a warm cup underneath.
- Pull the group handle down firmly until it locks.
- Wait a few seconds, or until coffee starts to flow from the spout.
- Push the handle back slightly to unlock it, then let it go. It returns slowly to upright and extracts a single espresso.
- Repeat steps 3 and 4 for a second shot.
Always make sure the handle is fully upright before you take the filter holder out.
Heating the group
Before service, remove the filter holder and pull the lever down to the stop. This runs hot water through the group to warm it. Never let go of the lever at the bottom. It springs back to upright fast and with real force, so stand to the side of it.
Dual fuel LPG or electric: which Retro do you need?
Choose the dual fuel FCL LPG models if you trade on the move. They heat the boiler with propane or with the electric element. You pick the fuel with a selector switch to the right of the right-hand group, before you switch the machine on.
- Warm-up: steam starts to pass after approximately 15 minutes on electric or 30 minutes on propane.
- Working pressure: the boiler then builds to 1.0 to 1.2 bar.
- Electric draw on propane: our FCL1LPG and FCL3LPG listings give an electric rating of 50W.
- Regulator: a 37 mbar propane regulator must be fitted before the machine is installed.
- Inverter users: keep the selector on GAS. The manual warns the unit will overload an inverter on the electric setting.
Run it on propane only. Butane fails to vaporise below about 2°C, which rules it out for UK outdoor trading for much of the year.
The machine must be installed by a Gas Safe registered engineer with COMCAT 2 on their certificate. That is the law for LPG work in a catering vehicle, and the engineer also gas-tests it before first use.
To see how the Retro compares with every other machine for mobile trading, read our best coffee machine for a coffee van or catering trailer guide.
Choose the electric FCL models for a café, kiosk or shop counter. They are plumb-in machines, so plan the services first.
- Water: a 15mm cold supply with a standard washing-machine isolator valve.
- Waste: a 1½-inch standpipe, within one metre of the machine.
- Power: the 1-group FCL1 runs from a 13A supply. The FCL2 (4kW) and FCL3 (7.5kW) draw more than a 13A plug can carry, which is roughly 3kW (our arithmetic). Book an electrician to fit the right circuit.
Which size suits your business?
1 group (FCL1LPG or FCL1). One lever, up to 100 espressos an hour. It suits a solo trader at weddings, private parties and small markets, where the lever is the selling point and queues are short.
2 groups (FCL2LPG or FCL2). Two levers, up to 200 espressos an hour. This is the usual pick for a coffee van with one or two people on the machine. For the full FCL2LPG detail, read our Fracino FCL2LPG lever espresso machine buying guide.
3 groups (FCL3LPG or FCL3). Three levers, up to 300 espressos an hour. Only buy it if you have two trained baristas and festival or event queues to feed. The Fracino Retro 3 Group dual fuel FCL3LPG is the biggest machine in the range. It weighs 75kg, so check your counter and floor can carry it.
The output figures are the maximum per hour. A lever needs a trained hand, so a new barista will pour fewer shots than the figure until they find their rhythm.
Who the Retro suits, and who should buy a Contempo
The Retro suits you if:
- You or your staff already pull good shots and want to show it off.
- Your bookings are weddings, corporate events and craft markets, where looks win the pitch.
- You want your van or counter to look different from every other coffee stand.
Buy a push-button machine instead if:
- You are new to espresso or you train casual staff every season.
- You need the same shot every time, with programmed volumes.
- Your counter or van has less height to spare.
The dual fuel Fracino Contempo CON2ELPG starts from £3,249 and doses each shot at the press of a button. Our Fracino Contempo dual fuel range guide covers every model. For a small café that wants a traditional single group without the lever, see our Fracino Classico review.
What you need before it arrives
- Headroom: the manual asks for 600mm clear above the machine, plus 75mm at the rear and 75mm at each side. With the 830mm height, that is roughly 1,430mm from counter top to the lowest shelf or roof (our arithmetic).
- A non-combustible surface: the machine must not sit on or against anything combustible.
- Propane parts (dual fuel models): a high-pressure hose that fits the quarter-inch Fulham nozzle, a 37 mbar propane regulator and a propane cylinder. These are bought separately.
- A water filter: a water treatment unit is required under the warranty. Limescale faults are not covered.
- A grinder: the Retro has no built-in grinder, so budget for an on-demand grinder.
Orders over £1,000 can be paid over time with lease finance, which spreads the cost of the machine and grinder together.
The biggest mistake Retro owners make
They clean it like a pump machine. On a pump machine, you backwash each group daily with a blank filter in the holder.
Never do that on a Retro. The Fracino manual says a blank filter will jam the group handle, and freeing it can damage the machine or injure you.
The second mistake is letting go of the lever at the bottom of the pull. Train every new member of staff on both points on day one.
Daily cleaning and servicing
- Group: scrub the group and around the filter holder washer with a shower plate brush dipped in liquid quartz cleaner.
- Filter holders: wash in warm soapy water and rinse. Soak in liquid quartz if heavily soiled, then rinse in clean water.
- Steam tubes: wipe with warm water and a cloth. If milk has set hard, soak them for 10 minutes first.
- Case: wipe with a soft damp cloth. Never use a scouring pad on the polished steel.
- Service: the recommended interval is 12 months. On the dual fuel models, the engineer must be Gas Safe registered with COMCAT 2.
Frequently asked questions
Is the Fracino Retro hard to use?
It takes more practice than a push-button machine, but it is not difficult. You lock in the filter holder, pull the lever down until it locks, wait for coffee to flow, then release it. Grind and dose still matter, as on any espresso machine. If you are brand new to espresso, a push-button Contempo is the easier start.
How many espressos an hour can a Retro make?
Up to 100 an hour on the 1-group, 200 on the 2-group and 300 on the 3-group. These are maximum figures for a trained barista. A new user will be slower until they get used to the lever, so size for your real queue, not the best case.
Can the dual fuel Retro run on butane?
No. Use propane only, with a 37 mbar propane regulator. Butane fails to vaporise below about 2°C, so it lets you down on cold mornings and through UK winters. Propane keeps working when the weather turns.
Can I run a dual fuel Retro from an inverter or battery?
Only with the selector switch on GAS. The Fracino manual warns that the unit will overload an inverter on the electric setting. On propane, our FCL1LPG and FCL3LPG listings give an electric rating of 50W.
Does the electric Retro need plumbing in?
Yes. The electric Retro is a plumb-in machine. It needs a 15mm cold water supply with a washing-machine isolator valve and a waste standpipe within one metre. The 2 and 3-group models also need a bigger electric supply than a 13A plug.
How tall is the Fracino Retro?
All six models are 830mm tall. The manual also asks for 600mm clear above the machine. That means roughly 1,430mm from the counter top to the nearest shelf or roof, which rules out some vans with low lockers.
Can I backflush a Retro with a blank filter?
No. The Fracino manual says a blank filter will jam the Retro group handle and may cause damage or injury. Clean the group with a shower plate brush and liquid quartz instead, and wash the filter holders separately.
What warranty does the Retro come with?
The Retro comes with 1 year parts warranty. A water treatment unit is required to keep it valid, and limescale faults are not covered. The recommended service interval is 12 months, by a Gas Safe registered engineer with COMCAT 2 on the dual fuel models.