Description
6 Litre Water Heater Open Flue EUP6
The new Morco EUP6 6 Litre water heater is an EUP compliant direct replacement for the D61B, D61E and MP6. The EUP6 can be installed easily in place of the previous models. The flue diameter is the same at 90mm, so if you are replacing a D61 you can use the existing flue. The EUP6 has a piezo ignition and is not available with an electronic ignition.
The EUPFK fitting/conversion kit will be required in order to fit the water heater as the gas and water connections are different to those on the D61 and MP6. This can be found in the related items section below. If you require a 10mm fitting kit, please order the EUPFK10 instead.
There is a conversion document available on the troubleshooting section of this website and within the fitting/conversion kit to make the replacement of a D61 with an EUP6 more straightforward.
- Morco EUP6 6L LPG Caravan Water Heater Specification
- Installation Internal wall mounted
- Dimensions (H x W x D) 550mm x 256mm x 245mm
- Weight 8kg
- Exhaust system Open flued
- Ignition method Piezo
- Gas consumption – Propane 0.93kg/hr
- Hot water delivery capacity 6 ltr/min (Max) at a 25°C rise
- Water pressure 0.2 – 10bar
- Flue Type Vertical 90mm diameter (not included)
- Connections Water – 1/2″ Bspm, Gas – 1/2″ Bspm
- Gas Type/Pressure Propane 37mbar or Butane 28-30mba
Extras
Fitting Kit: This installation kit is required for EUP6 & EUP11 water heater installations. It contains a 15mm gas isolation valve.
Flue Conversion Kit – These are compatible with the EUP6, MP6, D61B and D61E.
Diameter 90mm – Terminal height 570mm – Inner flue pipe length: 500mm
- Fitting Kit
- Flue Conversion Kit
1-2 day delivery
Reviews
There are no reviews yet.